AtomS3-Lite
BoardSpecifications
Radiosinherited from ESP32-S3
- Wi-Fi
- Wi-Fi 4 · 2.4 GHz
- Bluetooth LE
- BLE 5
- Bluetooth Classic
- no
- 802.15.4
- no
USB
- Native USB
- yes
- Connector
- usb-c
Board
- Form factor
- m5-atom
- Dimensions
- 24 × 24 × 9.5 mm
Display & extras
- Extras
- rgb-led
24x24mm ESP32-S3 atom unit without display: programmable RGB LED, IR transmitter, USB-C.
Firmware for this board
Reported
- ESPHomeReportedweb flasher
Flash ESPHome
Reported esp-atlas asserts this board↔firmware link at the shown trust tier — it does not guarantee your specific unit or the current firmware version. Flashing can erase keys/config and can brick the device. At your own risk.
Notes
- ESP32-S3FN8; 8 MB flash, no PSRAM
- WS2812C-2020 programmable RGB LED, IR transmitter LED, programmable button, HY2.0-4P interface, no onboard battery
- io.gpio_exposed=6 QUOTED: vendor page states "IO Interface x6", pins G5/G6/G7/G8/G38/G39. The page separately lists an HY2.0-4P Grove port (G1/G2) not covered by that "IO Interface" tally -- kept out of gpio_exposed since the vendor's own count doesn't include it. io.gpio_free=6 DERIVED: subtracting esp32-s3's soc.reserved_pins (strapping {0,3,45,46}, usb_flash_tied {19,20,35,36,37}) -- none of G5/G6/G7/G8/G38/G39 fall in either set -- gives 6 - 0 = 6. No max Grove/rail output current stated on this page, so power_out is omitted.
Verify my board
Reads the connected chip over USB and checks it against what esp-atlas cites for AtomS3-Lite — over Web Serial, no backend, nothing leaves your browser.
In-browser verify needs Web Serial: Chrome or Edge on a desktop. Safari, Firefox and phones cannot do it.
Serial monitor
Not connected.

