CrowPanel ESP32-S3 5.79" E-Paper HMI Display
BoardAlso known as: elecrow_crowpanel_579, CrowPanel 5.79
Specifications
Radiosinherited from ESP32-S3
- Wi-Fi
- Wi-Fi 4 · 2.4 GHz
- Bluetooth LE
- BLE 5
- Bluetooth Classic
- no
- 802.15.4
- no
USB
- Native USB
- yes
Board
- Battery connector
- yes
Display & extras
- Display
- 5.79in 272x792 e-paper SSD1683 x2 (SPI)
- Extras
- sd-card
A 5.79-inch 272x792 e-paper HMI board on an ESP32-S3-WROOM-1-N8R8 (8 MB flash, 8 MB PSRAM) with a battery connector, TF-card slot and a rotary switch.
Firmware for this board
Unverified
- draftlingUnverifiedrelease .bin
Flash draftling
Unverified esp-atlas asserts this board↔firmware link at the shown trust tier — it does not guarantee your specific unit or the current firmware version. Flashing can erase keys/config and can brick the device. At your own risk.
Notes
- Product page: module "ESP32-S3-WROOM-1-N8R8", 240 MHz, "8 MB Flash, 8 MB PSRAM"
- Display: 5.79-inch e-paper, "272(H)*792(L) Pixel", driver "SSD1683 x2", "3-/4-wire SPI, default 4-wire SPI"; active area "47.74 x 139.00 mm (H x L)"
- "BAT interface (SH1.0-2P connector)" supporting "2.2~3.7V"; charging circuit not detailed on the page (charging omitted); "TF Card Slot x1", "UART0 x1", "GPIO x1"; Rotary Switch, Menu, Back, Reset and BOOT buttons
- USB connector type is not stated (page lists "1x USB Cable" only; omitted)
- aka "elecrow_crowpanel_579" is the device token draftling uses for its release binaries
Verify my board
Reads the connected chip over USB and checks it against what esp-atlas cites for CrowPanel ESP32-S3 5.79" E-Paper HMI Display — over Web Serial, no backend, nothing leaves your browser.
In-browser verify needs Web Serial: Chrome or Edge on a desktop. Safari, Firefox and phones cannot do it.
Serial monitor
Not connected.
