ESP32-S2-DevKitC-1
Board
Specifications
Radiosinherited from ESP32-S2
- Wi-Fi
- Wi-Fi 4 · 2.4 GHz
- Bluetooth LE
- none
- 802.15.4
- no
USB
- Native USB
- yes
- Connector
- micro-usb
Board
- Form factor
- devkit
Display & extras
- Extras
- rgb-led
ESP32-S2-SOLO-2 based board with a micro-USB UART bridge plus the chip's native USB OTG interface.
Firmware for this board
No firmware recipes yet — help add one.
Notes
- Micro-USB UART-bridge port confirmed; a second, native ESP32-S2 USB OTG interface is also present but its physical connector type is not stated in the guide text (omitted)
- Bridge chip model not named in the official user guide (omitted)
- Recommended build is ESP32-S2-DevKitC-1-N8R2 carrying ESP32-S2-SOLO-2, 8 MB flash, 2 MB PSRAM; other module/flash/PSRAM combinations exist (fixed spec omitted since it varies by SKU)
- Dimensions only in separate PDF/DXF files (omitted)
- io.gpio_free=31 DERIVED, not quoted (SPEC-io-power.md §5.3). Headers J1+J3 break out 36 pads total (quoted from the user guide pin tables: J1 = GPIO 3-18,46; J3 = GPIO 0-2,19-21,33-45). Subtracting esp32-s2's soc.reserved_pins that are exposed -- strapping {0,45,46} (GPIO46 also listed under input_only, so counted once) and usb_flash_tied {19,20} -- 5 unique reserved pins exposed -- gives 36 - 5 = 31. Math not vendor-stated; verify before treating as exact.
Verify my board
Reads the connected chip over USB and checks it against what esp-atlas cites for ESP32-S2-DevKitC-1 — over Web Serial, no backend, nothing leaves your browser.
In-browser verify needs Web Serial: Chrome or Edge on a desktop. Safari, Firefox and phones cannot do it.
Serial monitor
Not connected.