Adafruit FunHouse

Board
by Adafruitadafruit-funhouse≈ medium (~$15–50)

Also known as: adafruit_funhouse_esp32s2

Verify my boardCompareEdit on GitHub
Adafruit FunHouse pinout
Pinout

Specifications

Radiosinherited from ESP32-S2

Wi-Fi
Wi-Fi 4 · 2.4 GHz
Bluetooth LE
none
802.15.4
no

USB

Native USB
yes
Connector
usb-c
Bridge chip
none — SoC native USB

Board

Form factor
funhouse

Display & extras

Display
1.54in 240x240 Color TFT
Extras
dps310aht20light-sensorcapacitive-touchbuzzerrgb-ledstemma-qt
Built onAdafruit FunHouse BoardESP32-S2 SoC

ESP32-S2 home-automation dev board with a 1.54in 240x240 TFT, DPS310/AHT20 sensors, capacitive touch, DotStar LEDs, buzzer, and STEMMA QT.

Firmware for this board

No firmware recipes yet — help add one.

Notes

  • ESP32-S2 WiFi home-automation dev board with an onboard TFT and sensors.
  • soc=esp32-s2 QUOTED: "ESP32-S2 240MHz Tensilica processor". flash_mb=4 QUOTED: "4 MByte of Flash". psram_mb=2 QUOTED: "2 MByte of PSRAM".
  • usb.connector=usb-c / bridge=native QUOTED: "USB C" and "native USB so it can act like a keyboard/mouse, MIDI device, disk drive". usb_serial omitted: esp32-s2 has USB-OTG only (no USB-Serial-JTAG peripheral).
  • display QUOTED: "1.54" Color TFT display with 240x240 pixels".
  • extras QUOTED: dps310 "DPS310 barometric pressure and temperature sensor"; aht20 "AHT20 relative humidity and temperature sensor"; light-sensor "Front facing light sensor"; capacitive-touch "Three capacitive touch pads and one capacitive touch slider"; buzzer "Speaker/Buzzer can play tones and beeps"; rgb-led "Five mini RGB DotStar LEDs"; stemma-qt "STEMMA QT port".
  • A "Plug in socket for Mini PIR sensor (not included)" and "Three STEMMA 3 pin JST connectors" are provided but the PIR is not an onboard-fitted sensor, so it is not listed under extras.
  • power omitted: no battery connector/charging stated (USB-powered). dimensions_mm omitted: not stated in mm. io omitted: no explicit broken-out GPIO count.

Verify my board

Reads the connected chip over USB and checks it against what esp-atlas cites for Adafruit FunHouse — over Web Serial, no backend, nothing leaves your browser.

In-browser verify needs Web Serial: Chrome or Edge on a desktop. Safari, Firefox and phones cannot do it.

Serial monitor

Not connected.