ESP32-C6-DevKitM-1

Board
by Espressifesp32-c6-devkitm-1≈ cheap (under ~$15)
Flash this board — 1 firmware option · Unverified
ESP32-C6-DevKitM-1 board
Board
ESP32-C6-DevKitM-1 pinout
Pinout

Specifications

Radiosinherited from ESP32-C6

Wi-Fi
Wi-Fi 6 · 2.4 GHz
Bluetooth LE
BLE 5.3
Bluetooth Classic
no
802.15.4
Zigbee 3.0, Thread 1.3, Matter

USB

Native USB
yes
Connector
usb-c

Board

Form factor
devkit

Display & extras

Extras
rgb-led
Built onESP32-C6-DevKitM-1 BoardESP32-C6 SoC

Compact ESP32-C6-MINI-1 board with dual USB-C (UART bridge + native USB) and a GPIO8 addressable RGB LED.

Firmware for this board

Unverified

  • WLEDUnverifiedhome
    Flash WLEDguided

    Unverified esp-atlas asserts this board↔firmware link at the shown trust tier — it does not guarantee your specific unit or the current firmware version. Flashing can erase keys/config and can brick the device. At your own risk.

Notes

  • Two USB Type-C ports: a UART-bridge port and the native ESP32-C6 USB port
  • Bridge chip model not named in the official user guide (omitted)
  • Carries ESP32-C6-MINI-1 or -1U module built on the ESP32-C6FH4 chip, 4 MB flash integrated in the chip package; no PSRAM
  • Addressable RGB LED on GPIO8
  • Wi-Fi 6 / BLE 5 / Zigbee 3.0 / Thread 1.3 (802.15.4)
  • Dimensions only in a separate Dimensions PDF (omitted)
  • io.gpio_free=17 DERIVED, not quoted (SPEC-io-power.md §5.3). Headers J1+J3 break out 22 pads total (quoted from the user guide pin tables: J1 = GPIO 0-8,14; J3 = GPIO 9,12-13,15-23). Subtracting esp32-c6's soc.reserved_pins that are exposed -- strapping {8,9,15} exposed out of {8,9,10,11,15} (3) and usb_flash_tied {12,13} (2) -- gives 22 - 3 - 2 = 17. Math not vendor-stated; verify before treating as exact.

Verify my board

Reads the connected chip over USB and checks it against what esp-atlas cites for ESP32-C6-DevKitM-1 — over Web Serial, no backend, nothing leaves your browser.

In-browser verify needs Web Serial: Chrome or Edge on a desktop. Safari, Firefox and phones cannot do it.

Serial monitor

Not connected.