ESP32-H2-DevKitM-1

Board
by Espressifesp32-h2-devkitm-1≈ cheap (under ~$15)
Verify my boardCompareEdit on GitHub
ESP32-H2-DevKitM-1 pinout
Pinout

Specifications

Radiosinherited from ESP32-H2

Wi-Fi
none
Bluetooth LE
BLE 5.3
Bluetooth Classic
no
802.15.4
Thread 1.4, Zigbee 3.0, Matter

USB

Native USB
yes
Connector
usb-c

Board

Form factor
devkit

Display & extras

Extras
rgb-led
Built onESP32-H2-DevKitM-1 BoardESP32-H2 SoC

Compact ESP32-H2-MINI-1 board with dual USB-C (UART bridge + native USB) and a GPIO8 addressable RGB LED.

Firmware for this board

No firmware recipes yet — help add one.

Notes

  • Two USB Type-C ports: a UART-bridge port and the native ESP32-H2 USB port (USB 2.0 full speed, up to 12 Mbps)
  • Bridge chip model not named in the official user guide (omitted)
  • Carries ESP32-H2-MINI-1 or -1U module, 4 MB flash integrated in the chip package; no PSRAM
  • Addressable RGB LED on GPIO8
  • Dimensions only in a separate Dimensions PDF (omitted)
  • io.gpio_free=14 DERIVED, not quoted (SPEC-io-power.md §5.3). Headers J1+J3 break out all 19 pads on the chip (quoted from the user guide pin tables: J1 = GPIO 0-5,13-14; J3 = GPIO 8-12,22-27). Subtracting esp32-h2's soc.reserved_pins that are exposed -- strapping {8,9,25} (3) and usb_flash_tied {26,27} (2) -- gives 19 - 3 - 2 = 14. Math not vendor-stated; verify before treating as exact.

Verify my board

Reads the connected chip over USB and checks it against what esp-atlas cites for ESP32-H2-DevKitM-1 — over Web Serial, no backend, nothing leaves your browser.

In-browser verify needs Web Serial: Chrome or Edge on a desktop. Safari, Firefox and phones cannot do it.

Serial monitor

Not connected.