Infiltra

Pentest View the repo

Infiltra Firmware is an open‑source custom firmware for ESP‑based devices (e.g., M5Stick, Cardputer, Flipper Zero, etc.) that equips hackers and security enthusiasts with a comprehensive toolkit for wireless testing, including Sub‑GHz, Wi‑Fi, BLE, RFID/NFC, IR, and NRF24L01+ signal capture, emulation, jamming, and attack capabilities.

auto-summary

204 stars · 15 forks

Maintainer
D3CRYPT-1
License
GPL-2.0
Distribution
web-flasherreleases
Capabilities
wifiblesub-ghz
Chip families
esp32esp32-s3

Runs on these boards

Known good

  • CardputerKnown goodM5Stackweb flasher
    Flash Cardputerweb flasherknown-good

    Known good esp-atlas asserts this board↔firmware link at the shown trust tier — it does not guarantee your specific unit or the current firmware version. Flashing can erase keys/config and can brick the device. At your own risk.

  • StickC-Plus2Known goodM5Stackweb flasher
    Flash StickC-Plus2web flasherknown-good

    Known good esp-atlas asserts this board↔firmware link at the shown trust tier — it does not guarantee your specific unit or the current firmware version. Flashing can erase keys/config and can brick the device. At your own risk.

README

Infiltra Firmware

Welcome to Infiltra Firmware, the ultimate custom firmware designed to enhance the capabilities of devices including M5StickC Plus, M5StickC Plus2, Cardputer, CYD, LilyGO T-Embed CC1101, RTL8720DN BW16 WiFi 5GHz Deauther, ESP8266 Deauther, ESP32, ESP32 WROOM (Headless Mode), WIO Terminal, and more!

Built by a dedicated community of hackers, developers, and security enthusiasts, Infiltra delivers a robust toolkit for wireless testing, hardware hacking, and advanced emulation.

🚀 Features

🔥 Sub-GHz (CC1101 Support)

  • Signal Reading & Emulation – Capture and replay complex remote signals for testing and automation.
  • Spectrum Analyzer – Scan and visualize active RF frequencies in real-time with detailed graphs.
  • Signal Jamming – Disrupt weak Sub-GHz signals to test system robustness.
  • Signal Saving & Organization – Efficiently store and categorize captured signals for future analysis.
  • Full Compatibility – Seamlessly works with Flipper Zero, LilyGO T-Embed CC1101, ESP32, M5 devices, and more.

📶 Wi-Fi Attacks & Network Testing

  • Wi-Fi Deauthentication (Including 5GHz on RTL8720DN) – Disconnect devices from networks and test security protocols.
  • Beacon Spam – Flood the area with hundreds of fake APs to test network response.
  • Evil Portal – Create sophisticated phishing Wi-Fi login pages to educate about phishing risks.
  • Packet Sniffing & Monitoring – Capture and analyze packets with detailed statistics and real-time updates.
  • Advanced Traffic Analysis – Use deep packet inspection to understand network load and vulnerabilities.
  • WPS Attack – Exploit WPS vulnerabilities for penetration testing.

🌀 Bluetooth (BLE) Exploits & Spam

  • BLE Device Spoofing – Emulate and clone popular BLE device signatures to test device security.
  • BLE Spam (iOS, Android, Windows) – Generate high volumes of BLE traffic to test system tolerance.
  • BLE Beacons & Advertising – Create and broadcast custom BLE beacon signals for proximity marketing tests.
  • BLE Packet Manipulation – Intercept and modify BLE packets to demonstrate potential security breaches.

📛 RFID & NFC Attacks

  • RFID Cloning & Emulation – Clone access controls and identity badges with high precision.
  • RFID Scanning & Saving – Detect and save RFID signals from a distance to test security systems.
  • NFC Card Emulation – Emulate NFC card communications to test and debug NFC-enabled devices.
  • Advanced Tag Manipulation – Manipulate NFC and RFID tags to demonstrate data vulnerability.

📡 Infrared (IR) Remotes & Attacks

  • IR Sending & Learning – Capture and replicate any IR signal from household remotes.
  • Extensive IR Database – Access and utilize a massive database with thousands of remotes and their full button mappings.
  • TV-B-Gone Mode – Discreetly switch off televisions in public areas to demonstrate potential disruptions.
  • Custom IR Replay – Load and execute complex IR command sequences for testing and demonstrations.

🌐 NRF24L01+ Support

  • 2.4 GHz Communication Testing – Test and debug communications using the NRF24L01+ module.
  • Mesh Network Simulation – Create and manage large-scale mesh networks to simulate real-world IoT environments.
  • Data Packet Analysis – Capture and analyze the data packets transmitted over NRF networks.
  • Security Vulnerability Testing – Test the security robustness of NRF communications against various attacks.

📦 Installation Guide

⚠️ Important: Backup Your Device Before Flashing!

1️⃣ Download the Latest Release

  • Visit our GitHub Releases page.
  • Download the appropriate Infiltra Firmware package for your device.

2️⃣ Flash the Firmware

  • Use our WebFlasher for a seamless flashing experience.
  • Follow device-specific flashing instructions for Flipper Zero, M5Stick, Cardputer, and others.

🛠 Development & Contributions

Join us in enhancing Infiltra Firmware! Get started with our GitHub repository and contribute through pull requests.

🤝 Community & Support

Connect with the Infiltra Network on Discord for the latest updates, discussions, and support!

🔹 Discord: Join Infiltra Network

📜 License

Infiltra Firmware is open-source under the MIT License. Utilize, modify, and distribute it freely!

🧑‍💻 Credits & Acknowledgments

Thanks to the Infiltra Community, M5Stack, ESP8266 Deauther Team, and others for their contributions to this project.

⭐ Support Us If you appreciate Infiltra Firmware, consider starring our GitHub repo!

🚀 Star Infiltra on GitHub 🚀

Read the full README on GitHub

source github.com/D3CRYPT-1/Infiltra-Firmware