GLIDE
A pocket synth that slides between every note, and builds its own sounds.
Firmware for the M5Stack Cardputer, original (v1.1) and ADV. By CHARL3X.
Share the sounds your device rolled, get help, show what you've made.
See it in action
Watch the demo
Watch another demo
GLIDE plays like a fretless string instrument. The key rows are tuned like strings and notes glide between pitches instead of snapping, so you can slide whole chords around and bend into notes right on the keyboard.
And no two GLIDEs sound alike. The sounds come from a generative engine: you roll them, evolve them, and keep the ones that hit. Every roll commits to a character first (a pluck, a bell, a pad, an acid squelch, a wobble bass) and then paints inside that character's bounds, so a fresh sound is always playable. The engine also seeds two of your ten slots from a number only your device has, which means your unit sounds like no one else's before you have touched a single setting. This is not an instrument where everyone who owns one sounds the same. That's the point.
Two more headline features:
-
Tilt morph. The gyro is a performance controller. Lean the device forward and back and the sound blends continuously into the one you were just on, or route tilt to vibrato, wah, or swell instead. One enter press toggles it, and it follows your hands across every sound.
-
It finds a song's key by ear. Hold fn+k and the mic listens to whatever's playing in the room, works out the key (root, mode, even the tempo) and retunes the instrument so you can solo over anything. ADV only, since it needs the mic.
Install
GLIDE is installed onto the Cardputer's own flash through bmorcelli's Launcher. Launcher is flashed once; after that, the card is how a build arrives, and Launcher is what installs it.
- Flash Launcher first (one time only). Follow the Launcher instructions; its web flasher is the easy way. If your Cardputer already runs Launcher, skip this step.
- Download the latest
GLIDE.bin and copy it to the /apps/ folder on the microSD card. That link always points at the newest build; the Releases page has the version notes.
- Boot, press a key for the Launcher menu, then
SD → apps → GLIDE → Install. After that GLIDE starts on its own every time you power on.
No WiFi, no accounts, no setup. Power on, splash (the boot chime is a single note gliding up an octave, played through the synth itself), play.
It only charges switched ON. Plug in a Cardputer with the side switch off and the battery stays exactly as empty as it started: no light, no charge. Switch it on first, then plug in. Charging with GLIDE running is fine; for a dim screen instead, restart into Launcher → CFG → charge mode. And of the two triggers on the top edge, the left one (BTN RST) restarts the device. That's the way back to Launcher, not `.
Updating
A newer GLIDE.bin sitting on the card does nothing on its own: the copy that runs lives in the device's flash, so updating means replacing that copy. Saved sounds, tweaks and settings survive either way; they live outside the app.
- Card. Download the latest
GLIDE.bin, put it in /apps/, then delete the installed GLIDE in Launcher first and install the new one from SD → apps. Launcher adds an app rather than replacing it, so skipping the delete leaves you with two GLIDE tiles and only the splash version number to tell them apart. The illustrated walkthrough is in docs/updating.md (printable PDF; there's a playing guide too, and a one-page card that fits both on a single sheet).
- OTA through Launcher. Press
esc (or any key) on Launcher's start screen, open OTA, connect to your WiFi, and find GLIDE in the list. Launcher fetches and installs it with no computer and no card shuffling.
The first five minutes
There's a full HOW TO PLAY screen on the device itself (settings → How to play), and the complete manual in this repo. But two pictures carry most of it: where everything sits, and where sounds come from.
Plain-text keymap
string 3 (hi) | 1 2 3 4 5 6 7 8 9 0 | - oct- = oct+ bksp PANIC
string 2 | q w e r t y u i o p | [ bend- ] bend+ \ tap tempo
string 1 | a s d f g h j k l ; | enter tilt
string 0 (lo) | z x c v b n m , . / | space sustain
` restart (HOLD ~0.7s) fn (hold) quick-edit layer
tab settings shift (hold) momentary chromatic
ctrl/opt volume -/+ (left thumb) alt loop pedal (left thumb)
fn + q..p : switch between the ten sounds, live
fn + shift + q..p : save your current tweaks over that slot
fn + k : cycle the key (root) up a semitone (HOLD: listen & retune)
fn + s : cycle the scale
fn + shift + k/s : the same cycles, backwards
fn + a : arpeggiate the backing chords (forwards only)
ADVANCED MODE ADDS
fn + 1..0 : pick a parameter, [ ] to adjust
fn + z / fn + x : arp rate / arp span
fn + h : harmony, a second voice above in key (toggle)
fn + c : chord mode, every key plays its whole chord (toggle)
From there, the first five minutes go like this:
-
Press keys. It sounds good immediately. Scale lock means every key is a scale tone, no dead notes, and the rows are strings tuned a fourth apart, like a guitar.
-
Hammer-on / pull-off. Hold a key and tap another on the same row: the voice glides up to it, no re-attack. Release, and it glides back. Each row behaves like a real string.
-
Slide a chord. The same move, with more fingers: hold a shape across rows, then re-finger it a few columns over while the old notes still ring. Every voice glides to its new target. This is the thing.
-
Hold shift to break out of the scale into pure chromatic semitones, only while held. That's the skill gate.
-
Tap the bottom row to latch drones and chord progressions under your solo (that's the amber row in the picture); alt is a one-button loop pedal. A backing band in your left thumb.
-
Roll your own sounds. tab opens settings on two big Randomize and Mutate buttons: the one-tap roll pictured up top. Every roll auditions instantly, undo/redo means you never lose a keeper, and fn+shift+letter saves it to a slot, or save it to SD with a name.
-
Two depths. A new unit starts in Basic: the essentials, with every key doing one job. Advanced (the first row of settings) adds chord mode, harmony, live sound knobs, effects and modulation. Switching loses nothing.
-
Tilt the device. enter toggles the gyro: lean forward and back and the sound morphs into the one you were just on; left and right adds vibrato. Pick a different Tilt feel in settings; Advanced rewires each axis on its own.
-
Match whatever's playing. Hold fn+k and the mic retunes the instrument to the song's key (ADV): your shapes stay where they are, the notes underneath them move. A single tap of fn+k changes the key by hand.
-
Lost? bksp is panic (silence everything); hold ` to save and restart. (That reboots straight back into GLIDE; for Launcher, press BTN RST on the top edge and tap a key as it comes up.)
Everything past that (the looper's overdub stack, the auto-progression, the mod matrix, the full tilt routing) is in the manual.
Recently
- USB MIDI, as a beta. A second download on the release page,
GLIDE-MIDI.bin, makes GLIDE a USB MIDI device: clock in and out, notes in from a keyboard or DAW (snapped into GLIDE's key), notes out to other synths and VSTs, tilt as the mod wheel. The normal GLIDE.bin and Launcher OTA are unchanged. Details in the manual.
- Auto key lands somewhere safe. LISTEN still names the key and mode it hears, and now drops you on that key's pentatonic, so the first thing you play over the song lands clean.
space on the card walks the fixes, major/minor flip first.
- Ten new kinds of sound. Randomize can now roll mallets, electric piano, glass, reed, flute, sitar, swells, tape, phase sweeps and hard-sync leads. Roll family, right above Randomize, keeps it in the family you pick.
- Oscillator color. FM, FM bell, Casio CZ style phase distortion, a wavefolder, hard sync and ring mod, with depth that follows each note's envelope (Advanced, settings → TONE).
- Even volume. Every sound sits at the same loudness on the speaker, so quiet plucks, bells and low notes come through (settings → SYSTEM).
- Two modes, Basic and Advanced. A new GLIDE starts in Basic: the essentials, every key doing one job, everything you can do named on the screen. Advanced is Basic plus chord mode, harmony, the live sound knobs, effects and modulation. Switch any time on the first row of settings; switching never loses a sound or a setting. An updated unit asks which you want the first time it starts.
- Chord mode.
fn+c (Advanced) makes every key play its whole chord, always in key. On the chromatic scale the bottom row picks the chord by hand: major, minor, sevenths, diminished, augmented.
- A loop pedal that keeps time. Tap
alt and the metronome counts you in; the loop closes on the bar line, and the click and the loop share one clock, so a take never drifts. In chord mode it records whole chords.
- A calmer play screen. What is switched on shows as a badge in the top bar, and a small strip under the scope carries the chords, the loop and a tilt slider that shows where your lean is taking the sound.
- Auto key now hears the mode, the home note, and the groove. Hold
fn+k and LISTEN does more than name a key: it tells Dorian from minor and Mixolydian from major by listening for the notes that separate them, re-seats the tonic when a two-chord vamp fools the textbook reading, and re-centres whatever scale you play (Blues included) on the song's true home. The same capture reads the tempo and locks the jam clock and synced delay to it; a beatless room leaves the tempo alone. The result card names what the song is, with the BPM beside it. Shuffle a playlist, hold two keys, solo.
- The odometer. Settings keeps a quiet lifetime count of the notes you have struck and your hands-on hours. No goals, no streaks; just the instrument's life with you.
- The second wave: five new sound characters. Randomize's archetype pool grows from nine to fourteen: a breathy slide whistle that always glides (the instrument's original soul), a drawbar organ spinning under a rotary, a tine piano for comping, a wobble bass whose filter pumps in time with the jam clock, and a bowed string section drenched in chorus. Rolls you couldn't get before, guarded by the same never-dead, never-shrill rules. The sound card now names the character each roll commits to, and the two seeded slots on devices you already own keep their exact sounds; the new pool arrives with a fresh seed or your own Re-roll bank, never as a side effect of updating.
- Idle dimming + screensaver. Leave it sitting and the backlight eases down to save the panel and battery; leave it longer and a phosphor screensaver takes over. The string at rest: a standing wave held across the screen while a soft window of light slides slowly along it, the sound's name whispered underneath. If a loop or jam is still running, the wave answers it. Any key wakes it and plays the note, so the first touch is never wasted. Settings → Screen idle (off / dim / dim + saver).
- Auto key detection. Hold
fn+k and GLIDE listens to a song through the mic, works out its key, and retunes so you can solo straight over it. (ADV only; it needs the mic.)
- Archetype-driven sound generation. Randomize now picks a character first (pluck, bell, pad, bass, acid, lead, brass, chip, or wild), then paints inside its bounds: real variety per roll, with guardrails so a roll is never dead, blown out, or warbling off-key.
- Tilt morph (synth blend). Map tilt to blend continuously between two sounds as you lean the device back and forth.
- Loop snap. The looper locks its length to the jam clock, so your loop and the auto-progression share one beat instead of drifting apart.
Going deeper
The manual covers all of it:
- Your sounds are yours: the ten slots, the two seeded generative slots unique to your unit, Randomize / Mutate / undo, and the unlimited SD library of named
.gpat patches that survives updates and travels card-to-card.
- Tilt: morph between two sounds by leaning the device, or route the gyro to vibrato, wah, or swell. Never pitch bend.
- The jam: latch drones on the bottom row, tap in a chord progression with no timing required, or loop a performance with the alt key, then solo over it in a different octave and sound while the backing holds its ground.
- Tempo & FX: tap tempo on
\, a delay that locks to the beat, and the whole chorus/delay/reverb rack live on-device.
- The modulation matrix: two LFOs, a second envelope, six routing slots, four filter modes. How two players with the same device end up with sounds that share no DNA.
- Every parameter and persistence & factory reset.
Bug reports and sounds are welcome; see CONTRIBUTING.md.
License
GLIDE is free to download and play under the PolyForm Noncommercial License 1.0.0. Play it anywhere, including at paid gigs, and share it freely for any noncommercial purpose, with the credits intact. The one line it draws: selling GLIDE, or anything built from it, is the author's alone.
The name, the logo, and the artwork in assets/ are not part of that grant.
Want to ship GLIDE inside a product, or sell devices with it loaded? A separate commercial licence is available: LICENSING.md has the details and how to ask. Third-party components are listed in THIRD-PARTY-NOTICES.md, and their licences travel with the firmware in dist/NOTICES.txt. Pass that along with any copy of the binary you share.
If GLIDE earned a spot in your pocket, or made a weird noise you didn't expect, you can buy me a coffee. The firmware is free, and it stays that way; a coffee just keeps the soldering iron warm and the next build coming.
"What fosters the most creativity? I think that's probably the way we should go." That was the closing question from the brainstorm. This is the answer we keep testing against: an instrument cheap enough for anyone, easy enough to sound good tonight, deep enough to be worth twenty years.