furble - Flexible Unified Remote Bluetooth Low Energy
A Bluetooth wireless remote shutter release originally targeted at Fujifilm mirrorless
cameras. furble now supports:
- Fujifilm
- Canon
- Ricoh
- Nikon
- Sony
The remote uses the camera's native Bluetooth Low Energy interface thus additional
adapters are not required.
furble is developed on ESP32 devices as a PlatformIO project.
M5StickC Plus2 (Dark theme)
M5Core2 (Default theme)
Supported Cameras
The following devices have been tested and confirmed to work:
- Fujifilm
- Canon
- Ricoh
- Nikon
- Sony
Table of Features
| Camera | Scanning | Pairing | Shutter Release | Focus | GPS |
| :---: | :---: | :---: | :---: | :---: | :---: |
| Fujifilm X & GFX | ✔️ | ✔️ | ✔️ | ✔️[^1] | ✔️ |
| Canon EOS (Remote) | ✔️ | ✔️ | ✔️ | ✔️ | :x:[^2] |
| Canon EOS (Smart) | ✔️ | ✔️ | ✔️ | :x:[^2] | ✔️ |
| Ricoh | ✔️ | ✔️ | ✔️[^3] | ✔️ | ✔️ |
| Nikon (Remote) | ✔️ | ✔️ | ✔️[^3] | :x:[^2] | :x:[^2] |
| Nikon (Smart) | ✔️ | :x: | :x: | :x: | :x: |
| Sony ZV | ✔️ | ✔️ | ✔️ | ✔️ | ✔️ |
[^1]: see #99
[^2]: Non-existent
[^3]: Auto-shutter release only, no manual exposure control
Supported Controllers
Initially targeted at the M5StickC, the following controllers from M5Stack are supported:
- M5StickC (EOL)
- M5StickC Plus
- M5StickC Plus2
- M5StickC Plus SE
- M5StickS3
- M5Core Basic
- M5Core2
Installation
Easy Install
The simplest way to get started is with the web installer.
Follow the instructions on the wiki: Easy Web Install
PlatformIO
PlatformIO does everything assuming things are installed and connected properly.
In most cases it should be:
- clone the repository
- plug in the M5StickC
platformio run -e m5stick-c -t upload
- OR plug in M5StickC Plus/Plus2
platformio run -e m5stick-c-plus -t upload
- OR plug in the M5Stack Core2
platformio run -e m5stack-core2 -t upload
More details are on the wiki: PlatformIO
Usage
The top level menu has the following entries:
Connect
Scan
Delete
Settings
Off
On first use, put the target camera into pairing mode, then hit Scan. If the
camera advertises a known, matching signature, it should appear in the list.
You can then connect to the target camera, which, if successful, will save the
entry and show the remote menu.
furble will identify as furble-xxxx where xxxx is a consistent identifier enabling one to differentiate multiple controllers.
Upon subsequent use it should be enough to hit Connect, selecting the
previously paired device and leading to the remote menu.
From the remote menu you may choose to disconnect, control the shutter or activate the intervalometer.
More details are on the wiki: Usage Guide
GPS Location Tagging
For Fujifilm & Sony cameras, location tagging is supported with the M5Stack GPS unit:
The previous unit is now EOL:
GPS support can be enabled in furble in Settings->GPS, the camera must also be configured to request location data.
The default baud rate for the GPS unit is 9600.
The new v1.1 unit runs at a higher baud rate and must be configured under
Settings->GPS->GPS baud 115200 for correct operation.
Intervalometer/Timer
The intervalometer can be configured via three settings in Settings->Timer:
- Count (number of images to take)
- Delay (time between images)
- Shutter (time to keep shutter open)
Count can be configured up to 999 or infinite.
Delay and shutter time can be figured with custom or preset values from 0 to 999 in milliseconds, seconds or minutes.
Some camera protocols such as Ricoh GR trigger capture with a single operation request and do not expose separate exposure start/stop control. For those cameras the intervalometer still controls the wait, count, and delay between captures, but the camera ignores the configured shutter-open duration.
Shutter Lock
When in Shutter remote control, holding focus (button B) then release (button A) will engage shutter lock, holding the shutter open until a button is pressed.
Themes
A few basic themes are included, to change:
Settings->Themes-><desired theme>
- hit 'Restart' to save and restart for the theme to take effect
- better dynamic theme change support is improving in upstream LVGL
Motivation
I found current smartphone apps for basic wireless remote shutter control to be
generally terrible.
Research revealed the main alternative was attaching a dongle to the camera, of
which there were many options varying in price and quality.
I really just wanted the Canon
BR-E1,
but for my camera.
Possibly Supported Cameras
Fujifilm
Given reports from the community and access to additional cameras, it
seems many (all?) Fujifilm cameras use the same Bluetooth protocol.
Reports of further confirmed working Fujifilm cameras are welcome.
Canon
With access to a Canon EOS M6, I was able to implement support for it. Other
Canon cameras might work, but I suspect the shutter control protocol will be
different.
@wolcano kindly implemented initial support for the Canon EOS RP.
@hijae kindly helped with better Canon EOS R support.
Ricoh
All Ricoh GR IV series cameras are theoretically supported. This support was
graciously implemented by @sky18Dragon.
The current implementation will not work with GR III or GR II.
Nikon
Nikon cameras that support the remote wireless controller (ML-L7) should work,
use the "Connection to remote" menu option.
This has been tested on a Nikon COOLPIX B600. Unfortunately, the remote wireless
mode has no support for GPS or focus functions, thus only shutter release works.
Note that other Nikon cameras will appear in the scan, but will not pair
(further support is under investigation).
@herrfrei kindly assisted with Z6 III support.
Sony
Sony cameras appear to use a reasonably uniform and robust bluetooth control
protocol. Most modern Sony cameras should be supported. Testing was performed
on Sony ZV-1F.
To pair with a Sony camera (some models may have different menu options, the
following matches the ZV-1F):
- set 'Bluetooth Rmt Ctrl' to 'On'
- set 'Bluetooth Function' 'On'
- under Bluetooth, start 'Pairing'
- start 'Scan' with `furble'
- due to an oddity with the Bluetooth library, if
furble 'Scan' is started
first, the Sony camera may not appear
Protocol Reverse Engineering
Android supports snooping bluetooth traffic so it was trivial to grab a HCI log
to see what the manufacturer supplied camera app was doing.
For all supported cameras, a snoop log of:
- scanning
- pairing
- re-pairing
- shutter release
was analysed with Wireshark.
It was then an experiment in reducing the interaction to the bare minimum just
to trigger the shutter release.
Supporting More Cameras
The best way is to repeat the previous steps, analyse the bluetooth HCI snoop
log with Wireshark, implement, then test against the actual device.
Background Story
Requirements
Hardware
I wanted a complete solution out of the box to have:
- bluetooth low energy
- physical button
- visual indicator (LED or display)
- battery
- case
- low cost
My search concluded with the M5StickC
from M5Stack.
The M5StickC and M5StickC Plus have since been EOL and replaced with the M5StickC Plus2.
The M5StickC is an ESP32 based mini-IoT development kit which covered all of the
requirements (and more). At time of writing, M5Stack sell the M5StickC for
US$9.95.
The M5StickC Plus(2) sells for US$19.95.
Software
The project is built with PlatformIO and depends on
the following libraries:
Known Issues
- depending on your perspective, battery life is anywhere from reasonable to bad
- with an active BLE connection and power management, the ESP32 consumes around 30mA
- an M5StickC Plus2 would last around 6 hours
- an M5StickC Plus would last around 4 hours
- an old M5StickC would last around 3 hours
- if battery life is crucial, and form factor is not, consider an M5Stack Core with the 1500mAh module
Things To Do
- Support more camera makes and models
- Get access to and support the following:
Links
Inspiration, references and related information for this project came from the following projects/posts:
- Canon
- https://iandouglasscott.com/2017/09/04/reverse-engineering-the-canon-t7i-s-bluetooth-work-in-progress/
- https://github.com/ArthurFDLR/BR-M5
- https://github.com/RReverser/eos-remote-web
- Fujifilm
- https://github.com/hkr/fuji-cam-wifi-tool
- https://github.com/petabyt/fudge
- Ricoh
- https://github.com/dm-zharov/ricoh-gr-bluetooth-api
- Sony
- https://gethypoxic.com/blogs/technical/sony-camera-ble-control-protocol-di-remote-control
- https://gregleeds.com/reverse-engineering-sony-camera-bluetooth
- https://github.com/Staacks/alpharemote