Bonnethead: Cardputer drums
DEMO VIDEO
This is a simple and lofi drum machine for the M5Cardputer.
Now available on M5Burner as "Bonnethead"
Features
- 16KHz sample rate
- 16 steps per pattern, 8 tracks
- 36 patterns
- Swing/shuffle
- Channel mute/solos
- Per-step velocity and sub-tick timing adjustment
- Pattern sequencer
- Per-channel filters
- Multiple drum kits
- Tuning, looping, envelopes and filters for samples
- Retrigger and reverse step effects
- Live keydrumming mode
- Render to SD card
- Sampled drum kits from SD card
- Pitching and tuning, including portamento
- Auto-pitchstretched loops
- Tap tempo
UI
The dot grid indicates the 16x8 steps for the current pattern.
Status line
Top
0 Pattern number in green
- Next fill pattern appears as a red superscript; as a red number when playing the fill
- If there's a pattern sequence, the patterns appear next to the pattern number at the top line (e.g.
12241223)
- Dancing man
- Mod key indicated ("F O A C ^" for fn, opt, alt, ctrl, shift)
- Record symbol in live keydrumming mode
Bottom
- BPM current BPM (60-320)
- SW current swing (0-99; about 20-30 is useful)
- VOL volume (0-16)
- KT kit selected
- At the right Current note: NNN VV KK FX P
- NNN: note name, like
C#4
- VV: velocity (0-9)
- KK: kick timing (0-11)
- FX: effect name
- P: portamento time (0-9) 0=off, 9=slowest
Controls
Pattern
-
(space) tap tempo. Press four times to set the tempo.
-
a-z enter sounds. See the drum map for details.
-
0-9 sets the velocity of the current step (0=silent, 9=max. 6=default)
-
del deletes the current step
-
[ "kick left" shift step timing back by 1/12 step
-
] "kick right" shift step timing forward by 1/12 step
-
fn+shift+← rotate current channel left
-
fn+shift+→ rotate current channel right
-
shift+[ kick current channel one 1/12 step left
-
shift+] kick current channel one 1/12 step right
-
ctrl+key set note pitch. q=middle C. Piano keyboard layout: q2we4r5ty7u8i9op for the top octave, zsxdcvgbhnjm for the bottom octave.
-
ctrl+[ decrease pitch by 10 cents
-
ctrl+] increase pitch by 10 cents
-
ctrl+↑ increase pitch by 1 octave
-
ctrl+↓ decrease pitch by 1 octave
-
ctrl+shift+<n> set portamento time to 0-9 (0=off, 9=slowest). Default is 0
-
tab cycle through FX
Global
Files
fn+s Save the current pattern in the startup buffer (automatically reloaded on startup)
fn+a <x> Save the file as bank (0-9a-z)
fn+o <x> Open bank (0-9a-z)
fn+n New file, reset everything
fn+r Render the current pattern/pattern sequence to a WAV file on the SD card. The file will be named /bonnethead/renders/render-<n>.wav
Sequencer
opt+<x> where n is 0-9a-z selects pattern n
opt+shift+<x> fill pattern n after this pattern, then resume
opt+ESC toggle pattern sequence mode
opt+← pattern cursor left
opt+→ pattern cursor right
opt+ENTER insert current pattern at cursor
opt+DEL delete pattern at cursor
channel
fn+k enter keydrumming mode. Press keys to play the drum sounds. Press fn+k to exit keydrumming mode. (note: red circle at top indicates live keydrumming mode). Fn-shift-K enables quantized keydrumming mode.
fn+<n> toggle mute channel n (1-8)
fn+shift+<n> toggle solo channel n (multiple channels can be solo'd)
fn+enter toggle solo the current channel (where the cursor is)
fn+- decrease filter cutoff on active channels (16 steps of filter)
fn+= increase filter cutoff on active channels
fn+\ decrease channel volume on active channels
fn+' inccrease channel volume on active channels
Kits
alt+<x> select drum kit x (note: this will cause a delay as the kit is synthesised/loaded)
- Only kits 1-4 are available w/o an SD card.
Note: you can create custom sampled kits by placing WAV files in /bonnethead/kits/base-<n>.kit on the SD card. (e.g. /bonnethead/kits/base-9.kit). Each WAV should be named a.wav through y.wav (any can be omitted, and will just be skipped). The kit will be loaded as 9 when you press alt+9 in this example. 5-9a-z are available for custom kits (1-4 are synthesised). WAV files should be 16-bit, 16KHz mono.
clipboard
fn+d delete current pattern
fn+c copy current pattern to clipboard
fn+x cut current pattern to clipboard
fn+v paste current pattern to clipboard
- NOTE: all clipboard functions operate only on currently enabled channels. So e.g. solo'ing one channel allows you to selectively delete/copy it (or muting all but three channels, etc.)
Drumkit
a -> h bass, major scale
i kick
j closed hat
k snare
l click/rimshot
m tom
n sweep
o beep
p open hat
q clap
r low bass
s cowbell
t damped bell
u crash
z Note off (appears as #)
, Note continue (appears as '). This can be used to slide notes or change velocity without retriggering the sample.
Preview mode
In preview mode, samples can be played with a-z. The current sample is displayed at the top of the screen. Press Button A to return to pattern mode.
Parameters can be edited:
detune (cents)
cutoff (0-1000)
volume (-5000-5000) centibels
start start point in samples
end end point in samples
lp start loop start point in samples (note: enabled if loop start!=loop end)
lp end loop end point in samples
attack attack time in ms
decay decay time in ms
sustain sustain level in centibels
release release time in ms
Keys
fn+s save kit (i.e. parameters of the current kit)
fn+o load kit (i.e. parameters of the current kit)
fn+n reset kit
fn+r enter live sampling/recording mode.
opt hold for fine adjust (+/- 1)
alt hold for coarse adjust (+/- 100)
alt+opt hold for very coarse adjust (+/- 1000)
↑ increase value (+/- 10 by default)
↓ decrease value (+/- 10 by default)
reset parameter to 0
← previous parameter
→ next parameter
tab cycle loop mode (off, forward, stretch, pingpong)